INSULGLUE ADHESIVE PRODUCT
Insulglue Adhesive is available in a 500 ml bottle & 25 lt Drum
Information in the Safety Data Sheet
The information in this safety data sheet is provided in accordance with the national Chemicals Regulations and EU-Directives. The product should not be used for purposes other than those shown in Section 1 without first referring to the supplier and obtaining written handling instructions. As the specific conditions of use of the product are outside the supplier’s control, the user is responsible for ensuring that the requirements of relevant laws are complied with. The information contained in this sheet is based on the present state of knowledge and current national legislation. It provides guidance on health, safety and environment aspects and should not be construed as any guarantee of technical performance or suitability for particular application.
SAFETY DATA | INFORMATION
Identification of the substance/ Preperation & Company
Chemical character and proposed application: flammable solvent based adhesive.
Composition/ Information about Chemical Ingredients
Substances presenting a health hazard within the meaning of the Chemical Regulations ’93 (Hazard Inf. and Packaging).
| Name of substance | UN-Code | Conc. %w/w | R-phrases | Hazchem Risk Labeling Code |
|---|---|---|---|---|
| SBP 50/115 | 1271 | 68-72 | R10/18/20/36/37/38 | 3YEXn |
Identification of Hazards
Type of danger: flammable and harmful.
Special information for humans and environment: Toxic vapours. Can cause skin irritation after repeated contact.
First Aid Measures
| General information: | in case of doubt, or when symptoms persist, seek medical attention. Never give anything by mouth to an unconscious person. |
| Inhalation: | remove the patient to fresh air. |
| Skin contact: | wash thoroughly with clean water. A skin-cleaner may be used. Do NOT use solvents or thinners. |
| Eye contact: | contact lenses should be removed. Irrigate copiously with clean, fresh water for at least 10 minutes holding the eyelids apart. Seek medical advice. |
| Glue: | 2 gsm |
| Ingestion: | if accidentally swallowed obtain immediate medical attention. Do NOT induce vomiting. The main hazard is aspiration into the lungs. Obtain medical advice. |
Fire Fighting Measures
Extinguishing media: Carbon Dioxide, dry chemical powder, foam, sand or earth.
Not to be used: Do not use water in a jet. Particular danger provoked by the product or its smoke after case of fire, fire will produce dense black smoke, containing hazardous products of combustion. Those products may be a hazard to health. Particular personal protection: appropriate self-contained breathing apparatus may be required. Cool closed containers exposed to fire with water-spray.
Accidental Release Measures
- Personal measures of attention: avoid skin contact.
- Protection of the environment: the product is a liquid.
- It contains dangerous components.
- Collect spillage for disposal according to the waste regulations.
- Procedure of cleaning and removing: contain and collect the product in mechanical way.
- Do not dispose in sewers. Contain spillage with sand.
- Clean preferably with a detergent, avoid the use of solvents
Handling & Storage
- Indication for secure handling: FLAMMABLE containers
Indication for fire/explosion-protection: store according to the requirements of SABS 089:1985
Storage
Demands for spaces of storage and vessels: store in a dry, well ventilated place, away from heat and direct sunlight at temperatures not above 35°C and away from sparks.
Information on storage together with other products: store separately from strong oxidizing agents and strong alkaline and acidic materials.
More information on conditions of storage: store only in containers of origin (or containers which are similar).
Preserve the label precautions.
Store in a dry, well-ventilated place not above 30°C, protected against heat and direct sunlight.
Storage Class: Class 1 Division 1a
Limits of Exposure and Personal Measures of Protection
Components with limits to be controlled:
| Name of substance | TLV(mg/m³) (ppm) | STEL (mg/m³) | S-Phrases |
|---|---|---|---|
| SBP 50/115 (Benzine) | 500 | 1000 | S2,S16,S25,S26,S28,S38 |
Personal Protection
Respirator: Provide respiratory protection.
Hand protection: Wear gloves, advice should be sought from glove suppliers.Barrier creams may help to protect exposed areas of the skin. (They are not substitutes for physical protection, don’t apply them after exposure).
Eye protection: Eye protection to protect against liquid splashes should be worn.
Physical & Chemical Properties
- State: liquid
- Colour: golden brown
- Smell: sweet synthetic
| Value | Unit | Method | |
| Flash point | -20 | °C | Abel closed cup IP170 |
| Viscosity at 25°C | liquid | 1500-2000 | CP Brookfield |
| Density at 25°C | 0,74 | g/ml | DIN 51 757/C |
| Lower explosion limit | 0,6 | vol % | |
| Upper explosion limit | 8,0 | vol % | |
| Point of ignition | 240 | °C | ASTM D2155 |
| Solubility in water | immiscible | ||
| Solubility in fat/solvents | soluble | 20°C | |
| Content of solvents | 72,00 % | ||
| Content of solvents | 155 | mbar @20°C | |
| Boiling point | 67 – 77 | °C | |
| pH-Value at 20°C | n.a. |
Stability & Reactivity
- Conditions: stable under recommended storage and handling conditions (see Sect. 7)
- Conditions and substances to avoid: avoid high temperatures (above 35° C). Don’t bring in contact with oxidizing agents or strong alkaline, acidic or oxidizing materials.
- Dangerous substances of decomposition: In a fire hazardous decomposition products such as smoke, CO², CO may be produced.
Toxicological Information
The inhalation of the vapours of the preparation may cause hazards to the health. (Irritation of mucous membrane, the respiratory system, damages of kidney and liver, adverse effects on the central nervous system).
Ecological Information
The product is a liquid and classified dangerous. There is no data available on polluting the environment.
Disposal Considerations
- Product: do not allow to enter drains,
- water courses or ground water.
- Key of disposal: 57110
- Name of disposal: glue waste, including containers are controlled waste and should be disposed in accordance to the Control of Pollution Act/Environment protecting Act.
- Uncleaned packing: eventually dispose by recycling.
Transport Information
UN Number 1133
CLASS-3.1 Pack Group – 2 Symbol – FLAMMABLE LIQUID
SHIPPING CODE: Adhesives UN 1133
(RID)
CLASS – 3 Item 3(B) Symbol – FLAMMABLE LIQUID
Road (ADR)
CLASS – 3 Item 3(B) Kemler Plate – 33 (1203)
Air (ICAO)
CLASS – 3 Pack Group 2 Symbol – FLAMMABLE LIQUID
Regulatory Information
- S 2: keep out of the reach of children.
- S 16: keep away from sources of ignition.
- S 25: avoid contact with eyes.
- S 26: in case of contact with the eyes, rinse immediately with plenty of water and seek medical advice.
- S 28: after contact with skin wash immediately with plenty of detergents and water.
- S 38: in case of insufficient ventilation wear suitable respiratory equipment.
- S 45: in case of accident or if you feel unwell, seek medical advice immediately, (show the label when possible).
Other Information
- Risk labeling: Xn (harmful)
- R 10 Flammable.
- R 18 In use, may form inflammable / explosive vapour air mixture.
- R 20 Harmful by inhalation.
- R 36/37/38 Irritating to eyes, respiratory system and skin.
- R 42 May cause sensitization by inhalation.
VidoGlue
Vidoglue is a Polychloroprene contact cement designed specifically for hand lasting of leather uppers to insole boards. It is yellow / amber in colour, is brushable and thick in consistency. It has an excellent heat-resistance coupled with high initial bond strength. These two properties ensure excellent performance during heat-setting of freshly lasted uppers. The ingredients used in this product are scheduled under REACH (EC) No 1907/2006 wherein the product is described as a “mixture”.
SAFETY DATA | INFORMATION
Application
Vidoglue is brush applied to both upper and insole board. The lasting margin should be minimum of 10mm. After a suitable drying period (15 – 20 minutes) uppers may be lasted by hand. Heat setting at maximum 130°C may follow if required.
Specifications
| Base: | Polychloroprene rubber / resin |
| Colour: | Amber / yellow |
| Viscosity: | ± 3 500 cPs |
| Mass Per Litre: | ± 0,8kg |
| Soilds Content: | ± 25% |
| Flash Point: | – 20˚C therefore highly flammable |
| Open Time: | ± 2 hours |
| Shelf Life: | 12 months |
| Packing: | 25 lt and 200 lt containers |
Identification of Hazards
Type of danger: flammable and harmful.
Special information for humans and environment: Toxic vapours. Can cause skin irritation after repeated contact.
First Aid Measures
| General information: | in case of doubt, or when symptoms persist, seek medical attention. Never give anything by mouth to an unconscious person. |
| Inhalation: | remove the patient to fresh air. |
| Skin contact: | wash thoroughly with clean water. A skin-cleaner may be used. Do NOT use solvents or thinners. |
| Eye contact: | contact lenses should be removed. Irrigate copiously with clean, fresh water for at least 10 minutes holding the eyelids apart. Seek medical advice. |
| Glue: | 2 gsm |
| Ingestion: | if accidentally swallowed obtain immediate medical attention. Do NOT induce vomiting. The main hazard is aspiration into the lungs. Obtain medical advice. |
Fire Fighting Measures
Extinguishing media: Carbon Dioxide, dry chemical powder, foam, sand or earth.
Not to be used: Do not use water in a jet. Particular danger provoked by the product or its smoke after case of fire, fire will produce dense black smoke, containing hazardous products of combustion. Those products may be a hazard to health. Particular personal protection: appropriate self-contained breathing apparatus may be required. Cool closed containers exposed to fire with water-spray.
Accidental Release Measures
- Personal measures of attention: avoid skin contact.
- Protection of the environment: the product is a liquid.
- It contains dangerous components.
- Collect spillage for disposal according to the waste regulations.
- Procedure of cleaning and removing: contain and collect the product in mechanical way.
- Do not dispose in sewers. Contain spillage with sand.
- Clean preferably with a detergent, avoid the use of solvents
Handling & Storage
Indication for secure handling: FLAMMABLE containers
Indication for fire/explosion-protection: Store according to the requirements of SABS 089:1985
Identification of Hazards
Indication for secure handling: FLAMMABLE containers
Indication for fire/explosion-protection: Store according to the requirements of SABS 089:1985
Physical & Chemical Properties
- State: liquid
- Colour: amber
- Smell: Characteristic hydrocarbon
| Value | Unit | Method | |
| Flash point | 20 | ˚C | Abel closed cup IP170 |
| Viscosity at 25˚ | Liquid | 2400 | CP Brookfield |
| Density at 25°C | 0,81 | g/ml | DIN 51 757/C |
| Lower explosion limit | 0,6 | vol % | |
| Upper explosion limit | 8,0 | vol % | |
| Point of ignition | 240 | ˚C | ASTM D2155 |
| Solubility in water | immiscible | ||
| Content of solvents | 75,00% | ||
| Vapour pressure @ 20°C | 55 | mbar | |
| Boiling point | 67-77 | °C |
Stability & Reactivity
| Conditions: | Stable under recommended storage and handling conditions. |
| Conditions and substances to avoid: | Avoid high temperatures (above 35°C). Don’t bring in to contact with oxidizing agents or strong alkaline, acidic or oxidizing materials. |
| Dangerous substances of decomposition: | In a fire hazardous decomposition product such as smoke, CO2, CO may be produced. |
Storage
| Demands for spaces of storage and vessels: | Store in a dry, well ventilated place, away from heat and direct sunlight at temp not above 35 °C and away from sparks. |
| Storage information together with other products: | Store separately from strong oxidizing agents and strong alkaline and acidic materials. |
| More information on conditions of storage: | Store only in containers of origin. (or containers which are similar). Observe the label precautions. Store in a dry, well ventilated place not above 30°C, protected against heat and direct sunlight. |
| Storage Class: | Class 1 Division 1a. |
Limitations of Exposure & Personal Measures of Protection
Technical safety measures: Provide adequate ventilation. This may be achieved by local or general exhaust ventilation. If these are not sufficient to maintain solvent-vapor-conc. below the exposure limits, suitable respiratory protective equipment has to be worn.
Components with limits to be controlled:
| Name of substance | TLV(mg/m3) (ppm) | STEL (mg/m3) |
| SBP 50/115 (Benzine) | 500 | 1000 |
| MEK | 200 | 150 |
Toxicological Information
The inhalation of the vapours of the preparation may cause hazards to the health. (Irritation of mucous membrane, the respiratory system, damages of kidney and liver, adverse effects on the central nervous system).
Ecological Information
The product is a liquid and classified dangerous. There is no data available on polluting the environment.
Disposal Considerations
| Product: | Do not allow entering drains/water courses or ground water. |
| Key of disposal: | 57110 |
| Name of disp: | Wastes of glues (Waste, including containers are controlled wastes and should be disposed in accordance to the Control of Pollution Act / Environment Protecting Act.) |
| Uncleaned packing: | eventually dispose in the recycling |
Regulatory Information
- R 10 Flammable.
- R 11 Highly Flammable.
- R 18 In use, may form inflammable / explosive vapour-air mixture.
- R 20 Harmful by inhalation.
- R 36/37/38 Irritating to eyes, respiratory system and skin.
- R 42 May cause sensitization by inhalation.
- R 50/53 Toxic to aquatic Organisms, may cause long term adverse effects.
- R 67 Vapors may cause drowsiness and dizziness.
- S 2 Keep out of reach of children.
- S 16 Keep away from sources of ignition.
- S 25 Avoid contact with eyes.
- S 26 In case of contact with the eyes, rinse immediately with plenty of water and seek medical advice.
- S 28 After contact with skin wash immediately with plenty of detergents and water.
- S 38 In case of insufficient ventilation wear suitable respiratory equipment.
- S 45 In case of accident or if you feel unwell, seek medical advice immediately, (show the label when possible).
- S 46 If swallowed, seek medical advice, and show the practitioner this document.
Transport Information
SEA
- CLASS – 3.1 Pack Group – 2 Symbol – FLAMMABLE LIQUID
- SHIPPING CODE: Adhesives HTN 3506.91
Rail (RID)
- CLASS – 3 Item 3(B) Symbol – FLAMMABLE LIQUID
Road (ADR)
- CLASS – 3 Item 3(B) Kemler Plate – 33 (1203)
Air (ICAO)
- CLASS – 3 Pack Group 2 Symbol – FLAMMABLE LIQUID
PASSENGER AIRCRAFT
- Maximum quantity per package: 5lt
- U.N. packing instruction: 305
- Transitional packaging Inst. No.: T300
VidoGlue Non-Flammables 440
V440 and V446 are high-strength non-flammable Neoprene rubber based contact adhesive formulated for a wide variety of uses. They effectively bond masonite, tempered and untempered hardboard, masonite, softboard, plastic laminates, asbestos cement sheets, vinyl sheeting, porcelain enamelled steel, chipboard, leather and rubber to each other or themselves.
Products are sold as follows:
- V440: for brush or roller application
- V446: for conventional (air) spray
SAFETY DATA | INFORMATION
Application
Surface to be bonded must be clean and dry. Metal surfaces should be degreased with Pekaklene and then rinsed with water and left to dry. PVC and oily surfaces should first be wiped with C408 solvent before application.
Using suitable equipment apply approximately a 50-micron thickness to each surface to be bonded. This may require up to two coats of adhesive. Thin with C408 solvent as solvent as required.
Allow the solvent to “flash off” (4 to 10 minutes minutes depending on weather conditions). Special care should be taken to ensure that ensure that the solvent has completely flashed off, particularly on non-porous surfaces.
To assemble large areas use spacers such as dowel rods or silicone paper between the two surfaces to prevent contact before the assembly positioned. After the edges have been correctly registered, the two surfaces can be pressed together as the spacers are removed.
Apply even pressure over the whole are area, sufficient to ensure to ensure a good bond.
NOTE: HEAT BONDING
Heat bonding is particularly suitable for the bonding of two non-porous surfaces as it not only completely eliminates the possibility of “solvent trap” but it also accelerates the curing of the adhesive and gives a higher initial bond strength.
Technical Data
Clean and coat the oat the surfaces as described.
When dry, heat up the surfaces using infra-red lamps or similar heating, to a surface temperature of 90° to 100°C for 2 to 3 minutes.
Remove from heat bond immediately (bond pressure 600 kpa minimum).
Safety Precautions
Avoid using V440 and V446 in confined spaces. Ensure adequate ventilation: use of V446 should be confined to a spray booth.
Chlorinated solvents give off toxic vapours at high concentrations (TLV = (TLV = 250 ppm).
Avoid contact with skin. For contact with eyes, flush with water and consult a doctor.
Limitations
Application temperature limits: 6° to 40°C. Do not apply during cold inclement weather as surface condensation will impair the bond strength of the adhesive.
Storage temperature limits: 5° to 35°C Protect from freezing. Ensure that partially used cans are well sealed to prevent evaporation.
Service temperature limits: -20°C to +90°C
Specifications
| Colour | Pale yellow |
| Viscosity | Free flowing syrup |
| Base | Oil resistant Neoprene elastomer |
| Solids content | Approx 16% v/v |
| Solvent | A blend of non-flammable chlorinated solvents |
| Coverage | A blend of non-flammable chlorinated solvents |
| Mass per Liter | 1,3kg |
| Storage stability | Up to 12 months at 25°C (stir well before use) Caution: Protect from freezing |
| Water resistance | Highly resistant to water, mild acids and alkalis. Not resistant to hot oils, etc |
| Thinners / cleanup | C408 solvent |
| Shipping specification | Non combustible |
| Packaging | 1lt, 5lt, 25lt, 200lt containers |
About us
Shesha Insulation can assist with the materials. The staff capacity and the know how – if you are cornered with a brain picking question. We deliver a friendly and professional services to all our customers that would satisfy even the most pickiest of customers.
Products
– Allied Products
– Chilled Water Insulation
– Fibreglass Products
– Pipe Support
– Polytec Stryrofoam/Polystyrene
– Mineral Wool
– Ultimate Mineral Wool
– Products
– Sound/Car Sound